Blogs

Blog Tags Help

Enter a tag to filter the current view
more
less
Combined feed for site

Lotus Tips & Tricks

Това е блога за Lotus трикове и тайни, които ще помогнат за по-продуктивната ни работа!

Main  | Next

Защо Lotus Notes-а ми е бавен?!

ЛИДИЯ ВИКУЛОВА  

Доста  често чувам упрека, че Lotus Notes е бавен. Не че софтуерът е най-перфектното нещо на света, но все пак не можем директно да правим заключения преди да сме проверили дали нещо друго не е причината за това. Ето, че намерих един полезен пост на колегите от e-productivity за Lotus Notes, които доста подробно са описали какви може да са причините Lotus Notes да върви бавно. И чак след като сме се уверили, че всички тези неща са изрядни, тогава можем да преминем към някои от тънкостите на Lotus администраторите, за да накараме Lotus Notes да работи по-бързо.
Авторът разделя прчините на три:

  • System
  • Lotus Notes
  • User Data


"I. SYSTEM
There's no question that better and faster hardware will [usually] lead to better overall performance at the desktop. But, not everyone can run out and replace their hardware. Still, it's valuable to understand the system elements that will affect your performance. these include:

CPU and RAM Memory - the speed of the processor and amount of available memory will always play a huge part in determining overall performance. Often, big leaps in performance can be gained simply be adding additional memory to the system. An $80 investment in memory chips can save hours each week. Bottom line: the more memory your system has available, the less time it will spend swapping memory to disk.

# of applications running - Each time you open an application, additional system memory is required. If your system does not have enough memory (RAM) it will swap to disk and you will be constrained by the speed of your disk. (See below). If you have lots of memory available, great - go ahead and open 20 applications. If not, consider closing a few windows.

Hard Drive Disk Speed - It goes without saying that the faster the disk the better overall performance. But every disk will run faster when the files are defragmented. Defragmenting optimizes the information on the disk so thet it can be located and retrieved as quickly as possible. This is something anyone can do and it doesn't cost a penny. I recommend running your disk defragmenter at least once a month. I run mine once a week and sometimes more often when I want higher performance. The less time the disk has to spend locating all of the parts of a file, the faster the response.

Disk Encryption - If you are running software that encrypts the contents of your disk, know that you are trading security for speed. Big time. Each time you read or write data it has to be encrypted/decrypted and you pay a penalty in speed. I usually recommend encrypting only a portion of the disk drive where sensitive documents are stored and, when possible, use hardware encryption. IF you do encrypt your hard drive, be sure to disable encryption in your Lotus Notes databases as you will pay a steep price for double encryption. (More on that later.)

Disk Space Available - it's important that you have sufficient disk space for swap files, temporary files, indexes, etc. I try not to exceed 60% of usable disk space.

OK, we've covered the system elements. Your key takeaway should be to use memory wisely and defragment your disks regularly. Now, let's take a look at Lotus Notes...

II. LOTUS NOTES

Basic or Standard Mode? - Lotus Notes 8.x provides many powerful and productive new features but if you are running on an older system it may slow to a crawl. If you are running Notes 8.x and your system does not meet IBM's recommended minimum requirements , consider running in "Basic" mode instead of "Standard" mode. This will speed things up until you can get faster hardware.

Database Encryption - Lotus Notes databases can be encrypted. The good news is that the encryption is hidden from the user and the entire process is transparent to the user. Well, mostly. When you enable encryption on a Notes database, every read or write needs to be processed by the encryption software and this can slow down performance. For laptops, I recommend using medium encryption; for desktops, I usually turn off encryption. In any case, if you encrypt your Notes data, do not also encrypt the disk drive that it's stored on. if you do, your system will be come painfully slow, as every read or write must be encrypted not once but twice. Did I mention that encryption will slow down your system? It's a tradeoff between security and performance.

Local or Server Replica? - With few exceptions, my experience has been shown a local replica will almost always outperform a server replica. When you use a local replica you are not constrained by the speed or congestion of your network or internet connection. This becomes even more relevant if you are using WiFi, a wireless WAN card, or a VPN connection. Bottom line, for maximum performance, I always recommend using a local replica. The good news is that you can set this up in 2 minutes and then forget about it while Lotus Notes handles the details.

Full-Text Index, or Not? - Lotus Notes can build a full-text index of all of the information in a Notes database, including information contained inside most file attachments. This is an easy way to speed up performance. When full-text indexing is enabled, Notes has less work to do to find the information you seek. Bottom line: for faster performance, always turn on full-text indexing, especially on your mail file.

OK, we've covered the Lotus Notes elements. Your key takeaway should be to use a local replica, with full-text indexing enabled, and the lowest level of encryption needed. Now, let's look at your data...

III. USER DATA

There are several elements of user data that work together to determine the performance you will receive when using Lotus Notes. This is especially true when using your mail file (which, as I explained, also contains calendar and tasks and more...). Let's look at these in greater detail:

File Size - In Lotus Notes, all of the data and applications are stored in a file on disk, often known as an .NSF file. While there's no practical limit to the size of this file, there are some things you need to know - especially when it comes to the size of your mail file. The first thing to know is that your Lotus Notes mail file doesn't contain just mail. It also contains your calendar and tasks. Also, it may contain contacts and journal/notebook entries if you sync these to your mail file. The point is, there's a lot going on in your mail file and it is constantly accessed during the course of the day. The smaller you can keep your file sizes, the better. I like to keep current information in my mail file and I archive old information when possible. This helps me keep my mail file size down and my system running as fast as possible.

# Documents - It almost goes without saying that the more documents (emails/calendar/tasks/attachments, etc) that you have in your database the more that needs to be processed. I'm a pack rat and I like to keep lots of history, but I don't keep it all in my mail file. (That's what archives are for.) For faster performance, store all you need to (or are permitted to) and no more. Don't be afraid to use the delete key.

# Folders & Views - Folders and Views are powerful features of Lotus Notes that allow you to organize and view the contents of a Notes database in different way. Used appropriately, these can greatly boost your productivity. At the same time, it's important to create only the folders and views that you need. Creating custom views is beyond the reach of most users so I will talk about folders instead. A folder is a collection of documents in a Notes database. Each time you open a folder, it must review and collect the documents it needs to show you. The more folders and documents to process the longer it can take. I'm just say'n. One more thing: if you sync your mail file to a PDA or smartphone, some of these devices may have limits on the number of folders that will sync. For example, some BlackBerry devices/software will not sync more than 255 folders.

eProductivity Enabled? - If you are using eProductivity for IBM Lotus Notes, then several additional views will be added to your mail file. These views allow eProductivity to filter and present only the relevant information to you when you need to see it. This productivity comes at a small price in terms of system performance, as eProductivity needs to scan through your mail file to find the relevant information. If you are running on a local replica and your Lotus Notes is already running fast, then this will be barely noticeable. On the other hand, if you are running on a server replica or if your Lotus Notes is already running slow for any of the reasons mentioned above, your performance could slow dramatically. The good news, is that there are many things that you can do to easily and quickly boost your performance and productivity.

File Attachments  - Email is an easy way to exchange files with others, but it's not the best place to store them. I won't lecture you on what you should/should not store in your mail file here, but I will remind you that large file attachments will slow down your system. For most Notes databases, this is barely noticeable, but in your mail file, where performance is important, I recommend deleting or archiving any file attachments that you do not need to have in your mail file."

Това е!

Първия Български Бутон за споделяне

Прикачени файлове от Quickr

ЛИДИЯ ВИКУЛОВА  


Първия Български Бутон за споделяне

How Lotus Software Can Help Us?

ЛИДИЯ ВИКУЛОВА  


Първия Български Бутон за споделяне

Skype в Lotus Notes :)

ЛИДИЯ ВИКУЛОВА  

Вече можем да ползваме любимия скайп и през Lotus Notes клиента! :)
Ето как може да стане:

  • Линк за сваляне;
  • Избираме версията на Notes, с която работим. Сваляме на компютъра;
  • Разархивираме;
  • Отваряме Notes. Намираме файла (Ctrl. + O) Skytus install;
  • Инсталираме;
  • Рестартираме Notes.
Просто и лесно. А можете да прочетете повече и тук.

Първия Български Бутон за споделяне

Support Assistant for Lotus Sametime

ЛИДИЯ ВИКУЛОВА  

От IBM са улеснили Sametime администрацията посредством Support Assistant. Той помага за по-бързото разрешаване на проблемите, като събира diagnostic files.

Повече за новия тул можете да прочетете тук.

Наличен е за сваляне.


Първия Български Бутон за споделяне

Full Text Indexed

ЛИДИЯ ВИКУЛОВА  

Едно бързо видео-демо за тези, които искат да получат пълното удобство от функцията Search в Lotus Notes.

 

Първия Български Бутон за споделяне

P.S. Ето един подобен на нашия блог, посветен на Lotus Tips в ежедневната работа.

Lotus Protector Access Ports

ЙОРДАН ВИЧЕВ  

Ако на някой му се наложи да сменя портовере за достъп до Lotus Protector трябва да знае следното:

По default достъпа за администриране до протектора става на следния адрес:
https://ProtectorName.DomainName.bg:443

Достъпа за потребителите е на следния адрес:
https://ProtectorName.DomainName.bg:4443

Ако искаме да разменим портовете е необходимо да се направи следното:

Влизаме на машинката(виртуална или желязо) със ssh или терминално отиваме в директорията и отваряте файла:
#cd /etc/apache2/vhosts.d/
#vi mailsec_vhosts.conf

Разменяте местата на портовете в секцията VirtualHost
Записвате и затваряте.
Влизате през web - MailSecurity-Policy-EndUserInterface и сменяте адреса:
https://ProtectorName.DomainName.bg:443

Рестартирате Lotus Protector - Това е!

Ако някой знае как се сменя ssh порта моля нека да сподели, аз лично неможах да го намеря : )

Free DAOS Education Module

ЛИДИЯ ВИКУЛОВА  

DAOS се оказа доста полезен инструмент, който спестява и дисково пространство и пари. Голяма част от Lotus клиентите вече са преминали на версия 8.5 и отдавна са забравили за задръстения с прикачени файлове сървър.

Ето един Free DAOS Education Module, на който попаднах вчера - надявам се да е полезен за Lotus администраторите. :)



Първия Български Бутон за споделяне

Как да добавим Facebook Events в нашия Lotus Notes календар?

ЛИДИЯ ВИКУЛОВА  

Lotus Notes календара дава възможност за добавяне на събития и задачи от други календари - Google calendar, iCalendar.
Ето как можем да добавим събитията от Facebook календара си:

1. Отиваме на Facebook Events страницата.
2. Горе дясно има бутон - Export Events. Кликваме. Отваря се прозорец и копираме линка най-долу.



3. Отваряме Notes Календара.
4. Избираме Add Calendar, а от падащото меню iCalendar.
5. В полето за URL поставяме вече копирания линк, кръщаваме календара, избираме цветове.
6. Кликваме ОК и готово! Facebook events са вече в нашия Lotus Notes календар:).



Първия Български Бутон за споделяне

Подобряване скоростта на дисковите операции при работа на Domino сървър под RedHat

ЙОРДАН ВИЧЕВ  

 За целта добавяме параметъра noatime във файла /etc/fstab на редовете където се монтира операционната система и където е инсталирато доминото(в повечето случаи е на еди и същи дял).
Например:
..................................
LABEL=/          /              ext3           defaults,noatime              0 0
.................................

Записваме файла с новите промени. Задължително изпълняваме командата:
#mount -a
Ако няма грешки изпълняваме:
#mount -o remount /
След което правим проверка:
#mount
....................

/ on / type ext3 (rw,noatime)
......................

Ако параметъра е там където сме го сложили всичко е ок.

За повече инфо относно този параметър:

http://www.redhat.com/docs/manuals/csgfs/browse/4.6/Global_File_System/s2-manage-mountnoatime.html

Ползване на POP3 услуга в Domino сървър!

ЙОРДАН ВИЧЕВ  

Използването на POP3 Service в Domino инфраструктура не е препоръчително, но ако нямате избор и се налага направете следното за да нямате ядове:

В notes.ini се добавя параметъра POP3MarkRead=1

След което рестартирате POP3 таска за версии от 6 нагоре, или целия сървър за версии 5.х

За повече инфо:

http://www-01.ibm.com/support/docview.wss?rs=463&context=SSKTMJ&context=SSKTWP&q1=POP3MarkRead&uid=swg21105142&loc=en_US&cs=utf-8&lang=en

Problem
By default, when POP3 clients retrieve messages, the messages are not marked as READ. If users are primarily POP users and "leave messages on server", the time it takes to pop messages significantly increases. Users are forced to periodically access their mail file via a Notes client and mark messages as READ. Is it possible to have messages marked as READ after they have been popped?
 
Solution
To have messages marked as READ after they are popped, use the following INI parameter:
    POP3MarkRead=1

When set to "1", the parameter will mark all messages as READ after they have been popped. The default value of 0 will leave messages as UNREAD.


Beginning in Notes Domino 6.0.4 and 6.5.2: Domino provides an option for POP3 to only mark mail messages as "read" if the content is actually retrieved via the POP3 server. Prior to this change, if the Notes.ini setting for POP3MarkRead had any non-zero value, the POP3 server would mark a message as read any time the POP3 server opened the message, even if just to satisfy the POP3 LIST command. Now, by setting POP3MarkRead=2, the POP3 server will only mark messages as read if the content is retrieved by the POP3 client (e.g. via the TOP or RETR command).


Supporting Information:
The parameter is available in both Notes/Domino 6.x and R5. The Administrator Help contains information regarding this parameter. Note, however, that in the R5 Admin Help the parameter is incorrectly stated as POP3_MarkRead. This has been corrected in the Notes/Domino 6 Admin Help.


 

How to Speed up Lotus Notes 8.5.1!

ЛИДИЯ ВИКУЛОВА  

След инсталация на новия клиент 8.5.1, за някои скоростта на отваряне и работа се забавя - учудващо? Но и за това Lotus администраторите са намерили изход - промяна в jvm.properties файла.
При мен инсталацията мина доста добре, доволна съм от скоростта на отваряне, дори не съм забелязала разлика от 8.5 версията - Бързичко. :)

Промяната в jvm.properties файла става по следния начин (оставям разучаването на Lotus администраторите):

"After downloading and upgrading my own client from R8.5 to R8.5.1, I thought (or imagined?) that my client was a little slower than the usual. Right away, I presumed that the jvm.properties file had been overwritten and I tried to run the code from my “old” button (grab the code in this post if you want). To my surprise, my code from the previous button didn’t work. After a bit of troubleshooting, I discovered that the jvm.properties file had moved in Lotus Notes R8.5.1. Other bloggers discovered this as well, like Mr. Andrew Pollack who posted something on his blog here.
 

So, what did I do? I updated the code for the button …


The Updated Code


With the change in location of the jvm.properties file in Lotus Notes R8.5.1, and after a few suggestions from the employees where I work, I updated the button to do the following:


  • It supports Lotus Notes R8.5.1 (duh!)
  • It warns people to never select a memory value higher than the amount of RAM installed in the machine (see the 1st comment on the original post on Andrew’s blog).
  • It creates an “UndoJVM.bat” batch file to roll-back the changes IF something goes wrong (like an employee who thinks it would be fun to try to select more memory than what’s installed in his machine).
  • It tells the employee about the “UndoJVM.bat” file."
Нека някой тества и сподели впечатленията си.



Първия Български Бутон за споделяне

Lotus Notes Time Tracker

ЛИДИЯ ВИКУЛОВА  

Тази седмица Chris Toohey ни зарадва с ново Безплатно Lotus Domino приложения - Time Tracker версия 1

Домино базата ни позволява реално да видим как работим и дали това, което сме свършили е било ефективно или неефективно. Можем да категоризираме по приоритет и проекти. *При мен за момента проектите са 1, 2 и 3 - надявам се да могат да се сменят.

Разбира се, ще има и версия 2, която ще включва подобрения като:

  • Blackberry клиент;
  • Интеграция с Notes календара;
  • Mobile access browser.


Първия Български Бутон за споделяне

Нов плъгин за Sametime- Sametime Recent Contacts

ЛИДИЯ ВИКУЛОВА  

Новият плъгин автоматично добавя до 25 контакта, с които най-често говорим в отделен панел, наречен Sametime Recent Contacts.



Инсталацията става по стандартния начин: от Application - Install - и добавяне на Folder-a. Ако се затруднявате погледнете Readme файла или тук.

Първия Български Бутон за споделяне

Как да настроим time zones в Lotus Notes 8.5?

ЛИДИЯ ВИКУЛОВА  


Първия Български Бутон за споделяне

Main  | Next